FreeBSD DenyHosts 擋掉暴力破解 ssh 的使用者

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
# cd /usr/ports/security/denyhosts; make install clean;
-------------------------------------------------------------------------------
To run denyhosts from startup, add denyhosts_enable="YES"
in your /etc/rc.conf.
Configiration options can be found in /usr/local/etc/denyhosts.conf
-------------------------------------------------------------------------------
In order to proper working of denyhosts
1. edit your /etc/hosts.allow file and add:
sshd : /etc/hosts.deniedssh : deny
sshd : ALL : allow
2. issue the following command if /etc/hosts.deniedssh does not exist yet
touch /etc/hosts.deniedssh 
-------------------------------------------------------------------------------
Warning:
 
syslogd should ideally be run with the -c option; this will ensure that
denyhosts notices multiple repeated login attempts.
 
To do this, add syslogd_flags="-c" to /etc/rc.conf
-------------------------------------------------------------------------------
===> Installing rc.d startup script(s)
===>   Registering installation for denyhosts-2.6_3
===>  Cleaning for denyhosts-2.6_3
#


編輯 /etc/rc.conf加入:

1
denyhosts_enable="YES"

編輯 /etc/hosts.allow 加入:

1
2
sshd : /etc/hosts.deniedssh : deny
sshd : ALL : allow

新增一個

1
touch /etc/hosts.deniedssh

設定 /usr/local/etc/denyhosts.conf:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
       ############ THESE SETTINGS ARE REQUIRED ############
 
########################################################################
#
# SECURE_LOG: the log file that contains sshd logging info
# if you are not sure, grep "sshd:" /var/log/*
#
# The file to process can be overridden with the --file command line
# argument
#
# Redhat or Fedora Core:
#SECURE_LOG = /var/log/secure
# 分析 Log 檔案位置
# Mandrake, FreeBSD or OpenBSD: 
SECURE_LOG = /var/log/auth.log
#
# SuSE:
#SECURE_LOG = /var/log/messages
#
# Mac OS X (v10.4 or greater - 
#   also refer to:   http://www.denyhosts.net/faq.html#macos
#SECURE_LOG = /private/var/log/asl.log
#
# Mac OS X (v10.3 or earlier):
#SECURE_LOG=/private/var/log/system.log
#
########################################################################
 
########################################################################
#
# HOSTS_DENY: the file which contains restricted host access information
#
# 拒絕名單
# Most operating systems:
HOSTS_DENY = /etc/hosts.deniedssh
#
# Some BSD (FreeBSD) Unixes:
#HOSTS_DENY = /etc/hosts.allow
#
# Another possibility (also see the next option):
#HOSTS_DENY = /etc/hosts.evil
#######################################################################
 
 
########################################################################
#
# PURGE_DENY: removed HOSTS_DENY entries that are older than this time
#             when DenyHosts is invoked with the --purge flag
#
#      format is: i[dhwmy]
#      Where 'i' is an integer (eg. 7) 
#            'm' = minutes
#            'h' = hours
#            'd' = days
#            'w' = weeks
#            'y' = years
#  多久後釋放
# never purge:
PURGE_DENY = 1d
#
# purge entries older than 1 week
#PURGE_DENY = 1w
#
# purge entries older than 5 days
#PURGE_DENY = 5d
#######################################################################
 
#######################################################################
#
# PURGE_THRESHOLD: defines the maximum times a host will be purged.  
# Once this value has been exceeded then this host will not be purged. 
# Setting this parameter to 0 (the default) disables this feature.
#
# default: a denied host can be purged/re-added indefinitely
#PURGE_THRESHOLD = 0
#
# a denied host will be purged at most 2 times. 
#PURGE_THRESHOLD = 2 
#
#######################################################################
 
 
#######################################################################
#
# BLOCK_SERVICE: the service name that should be blocked in HOSTS_DENY
# 
# man 5 hosts_access for details
#
# eg.   sshd: 127.0.0.1  # will block sshd logins from 127.0.0.1
#
# To block all services for the offending host:
#BLOCK_SERVICE = ALL
# To block only sshd:
# 監視的服務
BLOCK_SERVICE  = sshd
# To only record the offending host and nothing else (if using
# an auxilary file to list the hosts).  Refer to: 
# http://denyhosts.sourceforge.net/faq.html#aux
#BLOCK_SERVICE =    
#
#######################################################################
 
 
#######################################################################
#
# DENY_THRESHOLD_INVALID: block each host after the number of failed login 
# attempts has exceeded this value.  This value applies to invalid
# user login attempts (eg. non-existent user accounts)
# 如果該帳號不存在 /etc/passwd 嘗試嘗試幾失次失敗後,就阻擋該ip登入此服務
DENY_THRESHOLD_INVALID = 3
#
#######################################################################
 
#######################################################################
#
# DENY_THRESHOLD_VALID: block each host after the number of failed 
# login attempts has exceeded this value.  This value applies to valid
# user login attempts (eg. user accounts that exist in /etc/passwd) except
# for the "root" user
# 如果該帳號存在 /etc/passwd 嘗試嘗試幾失次失敗後,就阻擋該ip登入此服務
DENY_THRESHOLD_VALID = 10
#
#######################################################################
 
#######################################################################
#
# DENY_THRESHOLD_ROOT: block each host after the number of failed 
# login attempts has exceeded this value.  This value applies to 
# "root" user login attempts only.
# 阻擋 root 帳號錯誤登入次數
DENY_THRESHOLD_ROOT = 1
#
#######################################################################
 
 
#######################################################################
#
# DENY_THRESHOLD_RESTRICTED: block each host after the number of failed 
# login attempts has exceeded this value.  This value applies to 
# usernames that appear in the WORK_DIR/restricted-usernames file only.
#
DENY_THRESHOLD_RESTRICTED = 1
#
#######################################################################
 
 
#######################################################################
#
# WORK_DIR: the path that DenyHosts will use for writing data to
# (it will be created if it does not already exist).  
#
# Note: it is recommended that you use an absolute pathname
# for this value (eg. /home/foo/denyhosts/data)
# 把 deny 的 host 或者是 ip 紀錄到 Work_dir 裡面
WORK_DIR = /usr/local/share/denyhosts/data
#
#######################################################################
 
#######################################################################
#
# SUSPICIOUS_LOGIN_REPORT_ALLOWED_HOSTS
#
# SUSPICIOUS_LOGIN_REPORT_ALLOWED_HOSTS=YES|NO
# If set to YES, if a suspicious login attempt results from an allowed-host
# then it is considered suspicious.  If this is NO, then suspicious logins 
# from allowed-hosts will not be reported.  All suspicious logins from 
# ip addresses that are not in allowed-hosts will always be reported.
# 設定 deny host 寫入到該資料夾
SUSPICIOUS_LOGIN_REPORT_ALLOWED_HOSTS=YES
######################################################################
 
######################################################################
#
# HOSTNAME_LOOKUP
#
# HOSTNAME_LOOKUP=YES|NO
# If set to YES, for each IP address that is reported by Denyhosts,
# the corresponding hostname will be looked up and reported as well
# (if available).
# 取的hostname
HOSTNAME_LOOKUP=NO
#
######################################################################
 
 
######################################################################
#
# LOCK_FILE
#
# LOCK_FILE=/path/denyhosts
# If this file exists when DenyHosts is run, then DenyHosts will exit
# immediately.  Otherwise, this file will be created upon invocation
# and deleted upon exit.  This ensures that only one instance is
# running at a time.
#
# Redhat/Fedora:
#LOCK_FILE = /var/lock/subsys/denyhosts
#
# Debian (and FreeBSD)
LOCK_FILE = /var/run/denyhosts.pid
#
# Misc
#LOCK_FILE = /tmp/denyhosts.lock
#
######################################################################
 
 
       ############ THESE SETTINGS ARE OPTIONAL ############
 
 
#######################################################################
#
# ADMIN_EMAIL: if you would like to receive emails regarding newly
# restricted hosts and suspicious logins, set this address to 
# match your email address.  If you do not want to receive these reports
# leave this field blank (or run with the --noemail option)
#
# Multiple email addresses can be delimited by a comma, eg:
# ADMIN_EMAIL = foo@bar.com, bar@foo.com, etc@foobar.com
# 通知管理員的郵件帳號
ADMIN_EMAIL = 
#
#######################################################################
 
#######################################################################
#
# SMTP_HOST and SMTP_PORT: if DenyHosts is configured to email 
# reports (see ADMIN_EMAIL) then these settings specify the 
# email server address (SMTP_HOST) and the server port (SMTP_PORT)
# 
#
SMTP_HOST = localhost
SMTP_PORT = 25
#
#######################################################################
 
#######################################################################
# 
# SMTP_USERNAME and SMTP_PASSWORD: set these parameters if your 
# smtp email server requires authentication
#
#SMTP_USERNAME=foo
#SMTP_PASSWORD=bar
#
######################################################################
 
#######################################################################
#
# SMTP_FROM: you can specify the "From:" address in messages sent
# from DenyHosts when it reports thwarted abuse attempts
#
SMTP_FROM = DenyHosts <nobody@localhost>
#
#######################################################################
 
#######################################################################
#
# SMTP_SUBJECT: you can specify the "Subject:" of messages sent
# by DenyHosts when it reports thwarted abuse attempts
SMTP_SUBJECT = DenyHosts Report
#
######################################################################
 
######################################################################
#
# SMTP_DATE_FORMAT: specifies the format used for the "Date:" header
# when sending email messages.
#
# for possible values for this parameter refer to: man strftime
#
# the default:
#
#SMTP_DATE_FORMAT = %a, %d %b %Y %H:%M:%S %z
#
######################################################################
 
######################################################################
#
# SYSLOG_REPORT
#
# SYSLOG_REPORT=YES|NO
# If set to yes, when denied hosts are recorded the report data
# will be sent to syslog (syslog must be present on your system).
# The default is: NO
#
#SYSLOG_REPORT=NO
# 是否寫入系統記錄
#SYSLOG_REPORT=YES
#
######################################################################
 
######################################################################
#
# ALLOWED_HOSTS_HOSTNAME_LOOKUP
#
# ALLOWED_HOSTS_HOSTNAME_LOOKUP=YES|NO
# If set to YES, for each entry in the WORK_DIR/allowed-hosts file,
# the hostname will be looked up.  If your versions of tcp_wrappers
# and sshd sometimes log hostnames in addition to ip addresses
# then you may wish to specify this option.
# 
#ALLOWED_HOSTS_HOSTNAME_LOOKUP=NO
#
######################################################################
 
###################################################################### 
# 
# AGE_RESET_VALID: Specifies the period of time between failed login
# attempts that, when exceeded will result in the failed count for 
# this host to be reset to 0.  This value applies to login attempts 
# to all valid users (those within /etc/passwd) with the 
# exception of root.  If not defined, this count will never
# be reset.
#
# See the comments in the PURGE_DENY section (above) 
# for details on specifying this value or for complete details 
# refer to:  http://denyhosts.sourceforge.net/faq.html#timespec
#
AGE_RESET_VALID=5d
#
######################################################################
 
###################################################################### 
# 
# AGE_RESET_ROOT: Specifies the period of time between failed login
# attempts that, when exceeded will result in the failed count for 
# this host to be reset to 0.  This value applies to all login 
# attempts to the "root" user account.  If not defined,
# this count will never be reset.
#
# See the comments in the PURGE_DENY section (above) 
# for details on specifying this value or for complete details 
# refer to:  http://denyhosts.sourceforge.net/faq.html#timespec
#
AGE_RESET_ROOT=25d
#
######################################################################
 
###################################################################### 
# 
# AGE_RESET_RESTRICTED: Specifies the period of time between failed login
# attempts that, when exceeded will result in the failed count for 
# this host to be reset to 0.  This value applies to all login 
# attempts to entries found in the WORK_DIR/restricted-usernames file.  
# If not defined, the count will never be reset.
#
# See the comments in the PURGE_DENY section (above) 
# for details on specifying this value or for complete details 
# refer to:  http://denyhosts.sourceforge.net/faq.html#timespec
#
AGE_RESET_RESTRICTED=25d
#
######################################################################
 
 
###################################################################### 
# 
# AGE_RESET_INVALID: Specifies the period of time between failed login
# attempts that, when exceeded will result in the failed count for 
# this host to be reset to 0.  This value applies to login attempts 
# made to any invalid username (those that do not appear 
# in /etc/passwd).  If not defined, count will never be reset.
#
# See the comments in the PURGE_DENY section (above) 
# for details on specifying this value or for complete details 
# refer to:  http://denyhosts.sourceforge.net/faq.html#timespec
#
AGE_RESET_INVALID=10d
#
######################################################################
 
 
######################################################################
#
# RESET_ON_SUCCESS: If this parameter is set to "yes" then the
# failed count for the respective ip address will be reset to 0
# if the login is successful.  
#
# The default is RESET_ON_SUCCESS = no
#
#RESET_ON_SUCCESS = yes
#
#####################################################################
 
 
######################################################################
#
# PLUGIN_DENY: If set, this value should point to an executable
# program that will be invoked when a host is added to the
# HOSTS_DENY file.  This executable will be passed the host
# that will be added as it's only argument.
#
#PLUGIN_DENY=/usr/bin/true
#
######################################################################
 
 
######################################################################
#
# PLUGIN_PURGE: If set, this value should point to an executable
# program that will be invoked when a host is removed from the
# HOSTS_DENY file.  This executable will be passed the host
# that is to be purged as it's only argument.
#
#PLUGIN_PURGE=/usr/bin/true
#
######################################################################
 
######################################################################
#
# USERDEF_FAILED_ENTRY_REGEX: if set, this value should contain
# a regular expression that can be used to identify additional
# hackers for your particular ssh configuration.  This functionality
# extends the built-in regular expressions that DenyHosts uses.
# This parameter can be specified multiple times.
# See this faq entry for more details:
#    http://denyhosts.sf.net/faq.html#userdef_regex
#
#USERDEF_FAILED_ENTRY_REGEX=
#
#
######################################################################
 
 
 
 
   ######### THESE SETTINGS ARE SPECIFIC TO DAEMON MODE  ##########
 
 
 
#######################################################################
#
# DAEMON_LOG: when DenyHosts is run in daemon mode (--daemon flag)
# this is the logfile that DenyHosts uses to report it's status.
# To disable logging, leave blank.  (default is: /var/log/denyhosts)
#
DAEMON_LOG = /var/log/denyhosts
#
# disable logging:
#DAEMON_LOG = 
#
######################################################################
 
#######################################################################
# 
# DAEMON_LOG_TIME_FORMAT: when DenyHosts is run in daemon mode 
# (--daemon flag) this specifies the timestamp format of 
# the DAEMON_LOG messages (default is the ISO8061 format:
# ie. 2005-07-22 10:38:01,745)
#
# for possible values for this parameter refer to: man strftime
#
# Jan 1 13:05:59   
#DAEMON_LOG_TIME_FORMAT = %b %d %H:%M:%S
#
# Jan 1 01:05:59 
#DAEMON_LOG_TIME_FORMAT = %b %d %I:%M:%S
#
###################################################################### 
 
#######################################################################
# 
# DAEMON_LOG_MESSAGE_FORMAT: when DenyHosts is run in daemon mode 
# (--daemon flag) this specifies the message format of each logged
# entry.  By default the following format is used:
#
# %(asctime)s - %(name)-12s: %(levelname)-8s %(message)s
#
# Where the "%(asctime)s" portion is expanded to the format
# defined by DAEMON_LOG_TIME_FORMAT
#
# This string is passed to python's logging.Formatter contstuctor.
# For details on the possible format types please refer to:
# http://docs.python.org/lib/node357.html
#
# This is the default:
#DAEMON_LOG_MESSAGE_FORMAT = %(asctime)s - %(name)-12s: %(levelname)-8s %(message)s
#
#
###################################################################### 
 
 
#######################################################################
#
# DAEMON_SLEEP: when DenyHosts is run in daemon mode (--daemon flag)
# this is the amount of time DenyHosts will sleep between polling
# the SECURE_LOG.  See the comments in the PURGE_DENY section (above)
# for details on specifying this value or for complete details
# refer to:    http://denyhosts.sourceforge.net/faq.html#timespec
# 
#
DAEMON_SLEEP = 30s
#
#######################################################################
 
#######################################################################
#
# DAEMON_PURGE: How often should DenyHosts, when run in daemon mode,
# run the purge mechanism to expire old entries in HOSTS_DENY
# This has no effect if PURGE_DENY is blank.
#
DAEMON_PURGE = 1h
#
#######################################################################
 
 
   #########   THESE SETTINGS ARE SPECIFIC TO     ##########
   #########       DAEMON SYNCHRONIZATION         ##########
 
 
#######################################################################
#
# Synchronization mode allows the DenyHosts daemon the ability
# to periodically send and receive denied host data such that 
# DenyHosts daemons worldwide can automatically inform one
# another regarding banned hosts.   This mode is disabled by
# default, you must uncomment SYNC_SERVER to enable this mode.
#
# for more information, please refer to: 
#        http:/denyhosts.sourceforge.net/faq.html#sync 
#
#######################################################################
 
 
#######################################################################
#
# SYNC_SERVER: The central server that communicates with DenyHost
# daemons.  Currently, denyhosts.net is the only available server
# however, in the future, it may be possible for organizations to
# install their own server for internal network synchronization
#
# To disable synchronization (the default), do nothing. 
#
# To enable synchronization, you must uncomment the following line:
#SYNC_SERVER = http://xmlrpc.denyhosts.net:9911
#
#######################################################################
 
#######################################################################
#
# SYNC_INTERVAL: the interval of time to perform synchronizations if
# SYNC_SERVER has been uncommented.  The default is 1 hour.
# 
#SYNC_INTERVAL = 1h
#
#######################################################################
 
 
#######################################################################
#
# SYNC_UPLOAD: allow your DenyHosts daemon to transmit hosts that have
# been denied?  This option only applies if SYNC_SERVER has
# been uncommented.
# The default is SYNC_UPLOAD = yes
#
#SYNC_UPLOAD = no
#SYNC_UPLOAD = yes
#
#######################################################################
 
 
#######################################################################
#
# SYNC_DOWNLOAD: allow your DenyHosts daemon to receive hosts that have
# been denied by others?  This option only applies if SYNC_SERVER has
# been uncommented.
# The default is SYNC_DOWNLOAD = yes
#
#SYNC_DOWNLOAD = no
#SYNC_DOWNLOAD = yes
#
#
#
#######################################################################
 
#######################################################################
#
# SYNC_DOWNLOAD_THRESHOLD: If SYNC_DOWNLOAD is enabled this parameter
# filters the returned hosts to those that have been blocked this many
# times by others.  That is, if set to 1, then if a single DenyHosts
# server has denied an ip address then you will receive the denied host.
# 
# See also SYNC_DOWNLOAD_RESILIENCY
#
#SYNC_DOWNLOAD_THRESHOLD = 10
#
# The default is SYNC_DOWNLOAD_THRESHOLD = 3 
#
#SYNC_DOWNLOAD_THRESHOLD = 3
#
#######################################################################
 
#######################################################################
#
# SYNC_DOWNLOAD_RESILIENCY:  If SYNC_DOWNLOAD is enabled then the
# value specified for this option limits the downloaded data
# to this resiliency period or greater.
#
# Resiliency is defined as the timespan between a hackers first known 
# attack and it's most recent attack.  Example:
# 
# If the centralized   denyhosts.net server records an attack at 2 PM 
# and then again at 5 PM, specifying a SYNC_DOWNLOAD_RESILIENCY = 4h 
# will not download this ip address.
#
# However, if the attacker is recorded again at 6:15 PM then the 
# ip address will be downloaded by your DenyHosts instance.  
#
# This value is used in conjunction with the SYNC_DOWNLOAD_THRESHOLD 
# and only hosts that satisfy both values will be downloaded.  
# This value has no effect if SYNC_DOWNLOAD_THRESHOLD = 1 
#
# The default is SYNC_DOWNLOAD_RESILIENCY = 5h (5 hours)
#
# Only obtain hackers that have been at it for 2 days or more:
#SYNC_DOWNLOAD_RESILIENCY = 2d
#
# Only obtain hackers that have been at it for 5 hours or more:
#SYNC_DOWNLOAD_RESILIENCY = 5h
#
#######################################################################

啟動:

1
# /usr/local/etc/rc.d/denyhosts start

發表迴響

你的電子郵件位址並不會被公開。 必要欄位標記為 *